07.10.2019 в 22:19, megavolt380 сказал:ГТЦ я так понимаю стоит электрический, без вакуумного усилителя ?
если так, то нужен TECH c картриджем для тормозной системылибо вот так
BLEEDING FRONT BRAKES
The front brakes can be bled in conventional manner or by pressure bleeding. The manufacturer
recommends pressure bleeding front brakes with a minimum of 20 psi (1.4 kg/cm2 ).
BLEEDING FRONT BRAKES WITH PRESSURE BLEEDER
1. Bleed front brakes only when rear brakes have been bled first. Remove reservoir cap. Attach Bleeder
Adapter (J-35798) to reservoir. Attach bleeding equipment and pressurize system to 20 psi (1.4
kg/cm2 ).
2. Attach a bleeder hose to one front bleeder valve and submerge other end of hose in a container of
clean brake fluid. Open bleeder valve.
3. Allow fluid to flow until no air is seen coming out end of hose. Close bleeder valve. Repeat procedure
for other front brake. Fill reservoir to maximum level with accumulator fully charged.
BLEEDING REAR BRAKES
Bleeding the rear brakes requires a fully charged accumulator. The manufacturer does NOT recommend
bleeding rear brakes by using a pressure bleeder.
Bleeding Rear Brakes With Fully Charged Accumulator
1. Turn ignition on. Allow system to become fully charged. Pump motor will stop when system is fully
charged. Attach a bleeder hose to one rear bleeder valve and submerge other end of hose in a
container of clean brake fluid. Open bleeder valve.
2. With ignition on, slightly depress brake pedal for at least 10 seconds. Continue procedure until there is
no more air coming out of hose. Repeat procedure for other rear brake. Fill reservoir to maximum
level with a fully charged accumulator.
Совершенно верно вернее вакуумний усилитель есть, но не как обычно,. кастрюля.. а стальной шар., и три мотрорчика.Такой ГТЦ стоит на Бюик ривера 1989 года, Кулибин мне тоже сказал,- Нужен компьютер, или пробовать на прямую запускать мотрчики на тормозном, что би открить клапана АБС. Извините за наглость , а перевести с Английского не можете ?